JIS GRADE GL
Thickness |
0.14-1.0 mm |
||||||||||||||||||||||||||
Width |
600-1300 mm |
||||||||||||||||||||||||||
Zinc Coating |
40-120g/m2 |
||||||||||||||||||||||||||
Single weight |
3-10 tons |
||||||||||||||||||||||||||
Coil ID |
508/610 mm |
||||||||||||||||||||||||||
Thickness Tolerance |
±0.02mm |
||||||||||||||||||||||||||
Width Tolerance |
±0.2mm |
||||||||||||||||||||||||||
Certificate |
ISO9001:2008, ISO14001:2004, OHSAS18001:1999, SGS, BV |
||||||||||||||||||||||||||
Steel Grade |
JIS |
||||||||||||||||||||||||||
MOQ |
25 T |
||||||||||||||||||||||||||
Payment terms |
T/T or L/C |
||||||||||||||||||||||||||
Delivery time |
Within 30 working days after deposit |
||||||||||||||||||||||||||
Mechanical Properties of GL | |||||||||||||||||||||||||||
Grade |
Tensile test |
Application Yield strength MPa |
|||||||||||||||||||||||||
Yield Strength MPa |
Tensile strength MPa |
Elongation A80% ≥ |
|||||||||||||||||||||||||
DX51D+AZ |
270~500 |
22 |
Normal use |
||||||||||||||||||||||||
DX52D+AZ |
140~300 |
270~420 |
28 |
For drawing |
|||||||||||||||||||||||
DX53D+AZ |
140~280 |
270~380 |
30 |
For deep drawing |
|||||||||||||||||||||||
Spangle | |||||||||||||||||||||||||||
Production Lines | |||||||||||||||||||||||||||
Project |
GL production line 1 |
GL production line 2 |
|||||||||||||||||||||||||
Max Speed |
150-170 meters per minute |
180-200 meters per minute |
|||||||||||||||||||||||||
Capacity |
0.2 million tons(planned) |
0.25 million tons(planned) |
|||||||||||||||||||||||||
Year of operation |
2010 |
2011 |
|||||||||||||||||||||||||
Composition | |||||||||||||||||||||||||||
Zn+Al |
C |
Si |
Mn |
P |
S |
N2 |
|||||||||||||||||||||
98 |
0.100 |
0.200 |
0.400 |